Save your receiver and repair that broken antenna wire

At one point or another you may find yourself with a receiver wire that gets broke.  The reasons this happened is not important when it happens to you.  So instead of buying a new receiver just replace your wire.  Here is how its done. 

First you need to open up the case.  You may have to remove some screws and then carefully pop it open.

 Then pop out the circuit board .

 Then take your soldering iron with the needle tip and remove the broken wire.

Then just feed the new wire throw the hole and solder it to the board.  Once done reinstall the board and feed the wire through and close case.  Its just that easy.